SUMMARY OF THE MAIN ASTM STANDARDS GENERALLY USED FOR SHEETS / PLATES

SUMMARY OF THE MAIN ASTM STANDARDS GENERALLY USED FOR SHEETS / PLATES
ASTM	Grade	chemical requirements percent(%)										Mechanical requirements
		C max	Mn max	P max	S max	Si max	Ni	Cr.	Mo	Cu	Others	Tensile Strength mini-Mpa		Yield Strength mini-Mpa		Elong mini %	Hardness brinell Rockwell
A 240	304 304L 310 S 316 316L 317L 321 347	0.08 0.030 0.08 0.08 0.030 0.030 0.08 0.08	2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00	0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045	0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.030	0.75 0.75 1.50 0.75 0.75 0.75 0.75 0.75	8.00-10.5 8.00-12.0 19.0-22.0 10.0-14.0 10.0-14.0 11.0-15.0 9.00-12.0 9.00-13.0	18.0-20.0 18.0-20.0 24.0-26.0 16.0-18.0 16.0-18.0 18.0-20.0 17.0-19.0 17.0-19.0	2.00-3.00 2.00-3.00 3.00-4.00	-	5(C+N)<Ti<0.70% 10C<Cb+Ta<1.10%	515-75 485-70 515-75 515-75 485-70 515-75 515-75		205-30 170-25 205-30 205-30 170-25 205-30 205-30		40 40 40 40 40 40 40	202 00092 18300088 21700095 21700095 21700095 21700095 20200092
A 387 class 1 class2	2 5 7 9 11 12 21 22	0.05-0.21 0.15 0.15 0.15 0.04-0.17 0.04-0.17 0.04-0.17 0.04-0.17	0.55-0.80 0.30-0.60 0.30-0.60 0.30-0.60 0.40-0.65 0.40-0.65 0.30-0.60 0.30-0.60	0.035 0.04 0.030 0.030 0.035 0.035 0.035 0.035	0.040 0.030 0.030 0.030 0.04 0.04 0.035 0.035 0.035 0.035	0.15-0.40 0.050 1.00 1.00 0.50-0.80 0.15-0.40 0.50 0.50	-	0.50-0.80 4.00-6.00 6.00-8.00 8.00-10.0 1.00-1.50 0.80-1.15 2.75-3.25 2.00-2.50	0.45-0.60 0.45-0.65 0.45-0.65 0.90-1.10 0.45-0.65 0.45-0.60 0.90-1.10 0.90-1.10	-	-	Class 1 380-550 415-585 415-585 415-585 415-585 380-550 415-585 415-585	Class2 486-620 515-690 515-690 515-690 515-690 45-585 515-690	Class1 230 205 205 205 240 230 205 205	Class2 310 310 310 310 310 275 310 310	22 18 18 18 22 22 18 18	max201HB max92HRB max202HB max92HRB max217HB max95HRB max217HB max95HRB max217HB max95HRB max217HB max95HRB max201HB max92HRB max201HB max92HRB
A 515	55 60 65 70	0.20 0.27 0.31 0.33	0.90 0.90 0.90 1.20	0.035 0.035 0.035 0.035	0.04 0.04 0.04 0.04	0.15-0.40 0.15-0.40 0.15-0.40 0.15-0.40	-	-	-	-	-	380-515/55-75 415-550/60-80 450-585/65-85 485-620/70-90		205-30 220-32 240-35 260-38		27 25 23 21	-
A 516	55 60 65 70	0.20 0.23 0.26 0.28	0.60-1.20 0.85-1.20 0.85-1.20 0.85-1.20 0.85-1.20	0.035 0.035 0.035 0.035	0.04 0.04 0.04 0.04	0.15-0.40 0.15-0.40 0.15-0.40 0.15-0.40	-	-	-	-	-	380-515/55-75 415-550/60-80 450-585/65-85 485-620/70-90		205-30 220-32 240-35 260-38		27 25 23 21	-
A537	Class1 class2	0.24 0.24	0.70-1.35 0.70-1.35	0.035 0.035	0.040 0.040	0.15-0.40 0.15-0.40	0.25 max 0.25max	0.80max 0.80 max	0.35 max 0.35 max	-	-	485-620/70-90 550-69080-100		345-50 415-60		22 22	-

IS-2062-92 STEEL FOR GENERAL STRUCTURAL PURPOSES

Grade	Designation	% Chemical Composition						Tensile Strength (Min) Kg/mm2	Yield Strength(Min) Mpa			%EI.in gauge length 5.56OSo	Bend Test	Std. Lest Piece charpy V Notch Impact Energy Joule min
		C max	Mn max	S max	P max	Si max	C.E. max		<20mm	20-40min	>40min
A	FE410 WA	0.23	1.5	0.050	0.050	-	0.42	41.8	250	240	230	23	31	-
b	FE410 WB	0.22	1.5	0.045	0.045	0.40	0.41	41.8	250	240	230	23	<25 min	2t for 27 3t for t>25mm
C	FE410 WC	0.20	1.5	0.040	0.040	0.40	0.36	41.8	250	240	230	23	2t	27

IS-2002-62 STEEL PLATES FOR BOILERS

CHEMICAL COMPOSITION			TENSILE TEST			ELONGATION
Designation	C Max	Si Max	P Max	S Max	Tensile Strength Mpa	Yield Strength Mpa	Test Piece	% min.
IS 2002-1	0.18	0.10-0.35	0.040	0.040	362-442	540	5.65öSo 4öSo	26 30
IS 2002-2A	0.20	0.10-0.35	0.050	0.050	412-491	491	5.65öSo 4öSo	25 29
IS 2002-2B	0.22	0.10-0.35	0.050	0.050	510-608	491	5.65öSo 4öSo	20 24

SUMMARY OF THE MAIN ASTM STANDARDS GENERALLY USED FOR PIPING. SUMMARY OF THE MAIN ASTM STANDARDS GENERALLY USED FOR SHEETS / PLATES. NICKEL & NICKEL ALLOY PIPES & FITTINGS & BARS. ASTM A105 / A105M FORGED SOCKET WELD, SCREWED, CARBON STEEL PIPE FITTINGS. ASTM A234 / 234M PIPING FITTINGS OF WROUGHT CARBON STEEL FOR MODERATE AND ELEVATED TEMPERATURES. ASTM A 815/A 815/A 790 WROUGHT FERRITIC / AUSTENITIC & MARTENSITIC STAINLESS STEEL PIPE FITTINGS. ASTM A 193/A 193M ALLOY STEEL, CARBON STEEL & STAINLESS STEEL BOLTING FOR HIGH - TEMPERATURE SERVICE. DIMENSIONAL VARIATION TOLERANCE AS PER ASTM SPECIFICATIONS FOR PIPES. DIMENSIONAL TOLERANCES AS PER ANSI B 16.9 / B 16.28 / MSS SP - 43 BUTT WELD FITTIN

| Home | About Us | Products | Quality | Contact Us | Feedback | Sitemap |